Automotive Industry News & Information - Kevin's Auto Repair

First, Simply Drive Safely
Aggressive driving (speeding, rapid acceleration and braking) wastes gas. It can lower your gas mileage by 33 percent at highway speeds and by 5 percent around town. Sensible driving is also safer for you and others, so you may save more than gas money. Fuel Economy Benefit: 5–33% which equivalent in gasoline savings to $0.18–$1.19/gallon

It doesn’t matter if the car you’re driving is new or old, big or small. There are preventive maintenance steps every vehicle owner can take to make sure their car is as “green” or environmentally friendly as possible, according to the Car Care Council. By following a few simple preventive maintenance steps, you can help protect the environment by improving gas mileage, which in turn saves money at the pump.

Keep your car properly tuned for optimum performance- Regular tune-ups, maintenance and having clean air filters will help your car pollute less and burn less gas. Getting a tune-up can improve gas mileage by an average of 4 percent. Simply changing the car’s air filter can improve efficiency by 10 percent. Fixing a serious maintenance problem, such as a faulty oxygen sensor, can improve gas mileage by as much as 40 percent.

When do you need to schedule maintenance for your diesel engine and what is needed each time? For your convenience, we've added the preferred maintenance listing.

Fall driving can be unpredictable because of weather changes and the end of daylight saving time. We are all driving and enjoying the beautiful fall colors and need to be safe and aware on the roads this fall. Some great tips for safe fall driving include:

Watch out for leaves: Once leaves become wet, they can present slippery and dangerous driving conditions. Be sure to watch for patches of wet leaves on the road or on road lines. Dry leaves can also present a problem to your vehicle. Avoid parking your vehicle near leaf piles to prevent fires that could start from your vehicle's catalytic converter.

With gas prices high, our drivers are asking, "What can I do to improve gas mileage?" Our answer is that there are quite a few standard maintenance tips that will help you increase gas mileage and your vehicle safety.

One of the first things you should check is tire pressure. There is no one size fits all and it is a pretty easy thing to check at home and fix. On the inside of the driver’s door or door jam is a plate that indicates the correct tire pressure. Careful – there might be a different pressure for the front and rear tires. Check them at least once a month.

We’ve all heard a car or truck in our neighborhood that needs a new muffler. But there’s more to the exhaust system than just the muffler. The exhaust system has three main functions:

To safely get hot exhaust gas from the engine out the tailpipe
Treats the exhaust to remove harmful pollutants
Muffle the engine noise

Care and Maintenance Tips Keep Your Car Running in Top-Notch Condition: We’ve compiled our best expert advice, surprising tricks, and car care tips to prolong the life of your automobile!

1. Be patient during the break-in period: You’ve bought your dream car and now you want to make it last at long as possible in top condition. Here are some things to remember as you pull it out of the dealer’s lot:

During the break-in period, typically the first 1,000 miles (1,600 km), keep your speed under 55 mph (88 kpm) or to the speed recommended by your car’s manufacturer.
Avoid heavy loads on the drive train, such as towing trailers, and loading the roof rack or trunk with heavy construction materials.
Do not allow your new car to idle for long periods — this is good advice for the life of your car, but especially during breakin. The oil pressure generated by doing so may not be sending oil to every part of your engine.
Use only light to medium acceleration, keeping the engine rpms below 3,000 for the first few hours of driving.

In an attempt to boost performance, tire manufacturers analyze the capabilities of their tires under a variety of road conditions and speeds to ensure the safety and durability of their tires. These tests are conducted on all factory-made tires whether they are intended for rain, snow, off-road, performance or fuel conservation. Among the many tests done on new tires is stopping distance. Stopping distance is the span of road that it takes for a vehicle to come to a complete stop.